riscv_cpu_tlb_fill() uses the `size` parameter to check PMP violation
using pmp_hart_has_privs().
However, if the size is unknown (=0), the ending address will be
`addr - 1` as it is `addr + size - 1` in `pmp_hart_has_privs()`.
This always causes a false PMP violation on the starting address of the
range, as `addr - 1` is not in the range.
In order to fix, we just assume that all bytes from addr to the end of
the page will be accessed if the size is unknown.
Signed-off-by: Dayeol Lee <dayeol@berkeley.edu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Currently only PRV_U, PRV_S and PRV_M are supported, so this patch ensures that
the privilege mode is set to one of them. Once support for the H-extension is
added, this code will also need to properly update the virtualization status
when switching between VU/VS-modes and M-mode.
Signed-off-by: Jonathan Behrens <jonathan@fintelia.io>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This patch enables a debugger to read the current privilege level via a virtual
"priv" register. When compiled with CONFIG_USER_ONLY the register is still
visible but always reports the value zero.
Signed-off-by: Jonathan Behrens <jonathan@fintelia.io>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
If the number of registers reported to the gdbstub code does not match the
number in the associated XML file, then the register numbers used by the stub
may get out of sync with a remote GDB instance.
Signed-off-by: Jonathan Behrens <jonathan@fintelia.io>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The CPU loop tagged all the queued signals as QEMU_SI_KILL while it was
filling the `_sigfault` part of `siginfo`: this caused QEMU to copy the
wrong fields over to the userspace program.
Make sure the fault address recorded by the MMU is is stored in the CPU
environment structure.
In case of memory faults store the exception address into `siginfo`.
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This converts our port over from cpu_do_unassigned_access to
cpu_do_transaction_failed, as cpu_do_unassigned_access has been
deprecated.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
We directly access physical memory while walking the page tables on
RISC-V, but while doing so we were using cpu_ld*() which does not report
bus errors. This patch converts the page table walker over to use
address_space_ld*(), which allows bus errors to be detected.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
If we are in debugger mode, skip the CSR privilege level checking
so that we can read/write all CSRs. Otherwise we get:
(gdb) p/x $mtvec
Could not fetch register "mtvec"; remote failure reply 'E14'
when the hart is currently in S-mode.
Reported-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
We document this in docs/devel/load-stores.rst so lets follow it. The
32 bit and 64 bit access functions have historically not included the
sign so we leave those as is. We also introduce some signed helpers
which are used for loading immediate values in the translator.
Fixes: 282dffc8
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191021150910.23216-1-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change the handling of port F0h writes and FPU exceptions to implement IGNNE.
The implementation mixes a bit what the chipset and processor do in real
hardware, but the effect is the same as what happens with actual FERR#
and IGNNE# pins: writing to port F0h asserts IGNNE# in addition to lowering
FP_IRQ; while clearing the SE bit in the FPU status word deasserts IGNNE#.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move it out of pc.c since it is strictly tied to TCG. This is
almost exclusively code movement, the next patch will implement
IGNNE.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are three page size in qemu:
real host page size
host page size
target page size
All of them have dedicate variable to represent. For the last two, we
use the same form in the whole qemu project, while for the first one we
use two forms: qemu_real_host_page_size and getpagesize().
qemu_real_host_page_size is defined to be a replacement of
getpagesize(), so let it serve the role.
[Note] Not fully tested for some arch or device.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191013021145.16011-3-richardw.yang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove unnecessary argument and provide separate function for each
instruction.
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1571837825-24438-3-git-send-email-Filip.Bozuta@rt-rk.com>
Remove unnecessary argument and provide separate function for each
instruction.
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1571837825-24438-2-git-send-email-Filip.Bozuta@rt-rk.com>
This makes searches for instances of opcode usages easier.
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1571826227-10583-15-git-send-email-aleksandar.markovic@rt-rk.com>
Mostly fix errors and warnings reported by 'checkpatch.pl -f'.
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1571826227-10583-3-git-send-email-aleksandar.markovic@rt-rk.com>
Mostly fix errors and warnings reported by 'checkpatch.pl -f'.
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1571826227-10583-2-git-send-email-aleksandar.markovic@rt-rk.com>
This is the payoff.
From perf record -g data of ubuntu 18 boot and shutdown:
BEFORE:
- 23.02% 2.82% qemu-system-aar [.] helper_lookup_tb_ptr
- 20.22% helper_lookup_tb_ptr
+ 10.05% tb_htable_lookup
- 9.13% cpu_get_tb_cpu_state
3.20% aa64_va_parameters_both
0.55% fp_exception_el
- 11.66% 4.74% qemu-system-aar [.] cpu_get_tb_cpu_state
- 6.96% cpu_get_tb_cpu_state
3.63% aa64_va_parameters_both
0.60% fp_exception_el
0.53% sve_exception_el
AFTER:
- 16.40% 3.40% qemu-system-aar [.] helper_lookup_tb_ptr
- 13.03% helper_lookup_tb_ptr
+ 11.19% tb_htable_lookup
0.55% cpu_get_tb_cpu_state
0.98% 0.71% qemu-system-aar [.] cpu_get_tb_cpu_state
0.87% 0.24% qemu-system-aar [.] rebuild_hflags_a64
Before, helper_lookup_tb_ptr is the second hottest function in the
application, consuming almost a quarter of the runtime. Within the
entire execution, cpu_get_tb_cpu_state consumes about 12%.
After, helper_lookup_tb_ptr has dropped to the fourth hottest function,
with consumption dropping to a sixth of the runtime. Within the
entire execution, cpu_get_tb_cpu_state has dropped below 1%, and the
supporting function to rebuild hflags also consumes about 1%.
Assertions are retained for --enable-debug-tcg.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Continue setting, but not relying upon, env->hflags.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Continue setting, but not relying upon, env->hflags.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Continue setting, but not relying upon, env->hflags.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Continue setting, but not relying upon, env->hflags.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Begin setting, but not relying upon, env->hflags.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This functions are given the mode and el state of the cpu
and writes the computed value to env->hflags.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
By performing this store early, we avoid having to save and restore
the register holding the address around any function calls.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function assumes nothing about the current state of the cpu,
and writes the computed value to env->hflags.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are 3 conditions that each enable this flag. M-profile always
enables; A-profile with EL1 as AA64 always enables. Both of these
conditions can easily be cached. The final condition relies on the
FPEXC register which we are not prepared to cache.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Hoist the variable load for PSTATE into the existing test vs is_a64.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We do not need to compute any of these values for M-profile.
Further, XSCALE_CPAR overlaps VECSTRIDE so obviously the two
sets must be mutually exclusive.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create a function to compute the values of the TBFLAG_ANY bits
that will be cached, and are used by A-profile.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently a trivial wrapper for rebuild_hflags_common_32.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Hoist the computation of some TBFLAG_A32 bits that only apply to
M-profile under a single test for ARM_FEATURE_M.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create a function to compute the values of the TBFLAG_A32 bits
that will be cached, and are used by M-profile.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Set TBFLAG_ANY.BE_DATA in rebuild_hflags_common_32 and
rebuild_hflags_a64 instead of rebuild_hflags_common, where we do
not need to re-test is_a64() nor re-compute the various inputs.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create a function to compute the values of the TBFLAG_A32 bits
that will be cached, and are used by all profiles.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create a function to compute the values of the TBFLAG_A64 bits
that will be cached. For now, the env->hflags variable is not
used, and the results are fed back to cpu_get_tb_cpu_state.
Note that not all BTI related flags are cached, so we have to
test the BTI feature twice -- once for those bits moved out to
rebuild_hflags_a64 and once for those bits that remain in
cpu_get_tb_cpu_state.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create a function to compute the values of the TBFLAG_ANY bits
that will be cached. For now, the env->hflags variable is not
used, and the results are fed back to cpu_get_tb_cpu_state.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
